define "HIV Status Positive Condition":
  [Condition: Concepts."HIV-positive - HIV.B.DE116"] C
    where C.clinicalStatus ~ ConceptsCustom."active"
      and exists(C.category CC where CC ~ ConceptsCustom."encounter-diagnosis")
    sort by start of onset.toInterval()

define "HIV Status Positive Condition":
  Elements."HIV Status Positive Condition" C
  where C.onset before end of "Measurement Period"

/* End of HIV-inconclusive */

/*
@dataElement: HIV.B.DE115 - HIV status
@activity: HIV.B7 Test for HIV using testing algorithm
@description: HIV status reported after applying the national HIV testing algorithm. No single HIV test can provide an HIV-positive diagnosis.
*/
define "HIV Status Observation":
  [Observation: Concepts."HIV status"] O
    where O.status in { 'final', 'amended', 'corrected' }

define "HIV Status Positive Observation":
"HIV Status Observation" O
    where O.value ~ Concepts."HIV-positive - HIV.B.DE116"
      sort by start of effective.toInterval()

define "HIV Status Positive Observation":
  Elements."HIV Status Positive Observation" O
  where O.issued before end of "Measurement Period"
  or O.effective.toInterval() starts before end of "Measurement Period"

define "Has HIV-positive Status":
  exists "HIV Status Positive Condition"
  or exists "HIV Status Positive Observation"

/* End of Gonorrhoea test date B.DE255 */

/*
@dataElement: HIV.B.DE256 - Gonorrhoea test result
@activity: HIV.B23 Offer sexual and reproductive health services
@description: Result from Gonorrhoea test
*/

define "Gonorrhoea test result B.DE256":
  [Observation: Concepts."Gonorrhoea test result - HIV.B.DE256"] O
    where O.status in { 'final', 'amended', 'corrected' }

/* End of Gonorrhoea test date B.DE255 */

/*
@dataElement: HIV.B.DE256 - Gonorrhoea test result
@activity: HIV.B23 Offer sexual and reproductive health services
@description: Result from Gonorrhoea test
*/

define "Gonorrhoea test result B.DE256":
    Elements."Gonorrhoea test result B.DE256" O
    where O.effective.toInterval() during "Measurement Period"

/**
 * Numerator
 * 
 * Definition: Number of people living with HIV tested for gonorrhoea (using a molecular test, culture or POC test) while attending HIV care and treatment services
 * Calculation: COUNT of clients with "HIV status"='HIV-positive' AND "Gonorrhoea test date" in the reporting period
 */

define "Numerator":
  HIE."Has HIV-positive Status" and
  exists(HIE."Gonorrhoea test result B.DE256")

/* End of Other A.DE23 */


/*
@dataElement: HIV.B HTS Visit Enounter
@activity: HIV.B1 Determine reason for visit
@description: Encounter for HIV testing services visit
*/
define "HTS Visit":
  [Encounter] E
    where E.type.coding.code contains ConceptsCustom."HTS Visit".code

// Auto-generated Elements from DAK Data Dictionary
//   Entries based on DAK Data Dictionary for Data Elements marked as used
//   in at least one Decision Support Table or Aggregate Indicator

/*
@dataElement: HIV.A.DE3 - Visit date
@activity: HIV.A2 Gather client details
@description: The date and time of the client's visit
*/
define "HTS Visit":
  Elements."HTS Visit" E
    where E.period.toInterval() during "Measurement Period"

define "Visit date":
  "HTS Visit" E
  return E.period.start

/**
 * Denominator
 *
 * Definition: Number of people living with HIV attending HIV care and treatment services during the reporting period
 * Calculation: COUNT of clients with "HIV status"='HIV-positive' with a "Visit date" in reporting period
 */

define "Denominator":
  HIE."Has HIV-positive Status" and 
  exists(HIE."Visit date")

/* Populations */

/*
 *Initial Population
 */

define "Initial Population":
  true

define function ToConcept(concept FHIR.CodeableConcept):
    if concept is null then
        null
    else
        System.Concept {
            codes: concept.coding C return ToCode(C),
            display: concept.text.value
        }

define function ToCode(coding FHIR.Coding):
    if coding is null then
        null
    else
        System.Code {
          code: coding.code.value,
          system: coding.system.value,
          version: coding.version.value,
          display: coding.display.value
        }

define function ToDateTime(value dateTime): value.value

define function ToString(value ObservationStatus): value.value

define function ToDateTime(value instant): value.value

define function ToString(value string): value.value

/*
From FHIRCommon 4.1.0:
*/

/*
@description: Normalizes a value that is a choice of timing-valued types to an equivalent interval
@comment: Normalizes a choice type of FHIR.dateTime, FHIR.Period, FHIR.Timing, FHIR.instance, FHIR.string, FHIR.Age, or FHIR.Range types
to an equivalent interval. This selection of choice types is a superset of the majority of choice types that are used as possible
representations for timing-valued elements in FHIR, allowing this function to be used across any resource.

The input can be provided as a dateTime, Period, Timing, instant, string, Age, or Range.
The intent of this function is to provide a clear and concise mechanism to treat single
elements that have multiple possible representations as intervals so that logic doesn't have to account
for the variability. More complex calculations (such as medication request period or dispense period
calculation) need specific guidance and consideration. That guidance may make use of this function, but
the focus of this function is on single element calculations where the semantics are unambiguous.
If the input is a dateTime, the result a DateTime Interval beginning and ending on that dateTime.
If the input is a Period, the result is a DateTime Interval.
If the input is a Timing, an error is raised indicating a single interval cannot be computed from a Timing.
If the input is an instant, the result is a DateTime Interval beginning and ending on that instant.
If the input is a string, an error is raised indicating a single interval cannot be computed from a string.
If the input is an Age, the result is a DateTime Interval beginning when the patient was the given Age,
and ending immediately prior to when the patient was the given Age plus one year.
If the input is a Range, the result is a DateTime Interval beginning when the patient was the Age given
by the low end of the Range, and ending immediately prior to when the patient was the Age given by the
high end of the Range plus one year.

NOTE: Due to the
complexity of determining a single interval from a Timing or String type, this function will throw a run-time exception if it is used
with a Timing or String.
*/
define fluent function toInterval(choice Choice<FHIR.dateTime, FHIR.Period, FHIR.Timing, FHIR.instant, FHIR.string, FHIR.Age, FHIR.Range>):
  case
    when choice is FHIR.dateTime then
      Interval[FHIRHelpers.ToDateTime(choice as FHIR.dateTime), FHIRHelpers.ToDateTime(choice as FHIR.dateTime)]
    when choice is FHIR.Period then
      FHIRHelpers.ToInterval(choice as FHIR.Period)
    when choice is FHIR.instant then
      Interval[FHIRHelpers.ToDateTime(choice as FHIR.instant), FHIRHelpers.ToDateTime(choice as FHIR.instant)]
    when choice is FHIR.Age then
      Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(choice as FHIR.Age),
        FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity(choice as FHIR.Age) + 1 year)
    when choice is FHIR.Range then
      Interval[FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((choice as FHIR.Range).low),
        FHIRHelpers.ToDate(Patient.birthDate) + FHIRHelpers.ToQuantity((choice as FHIR.Range).high) + 1 year)
    when choice is FHIR.Timing then
      Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a Timing value is not supported')
    when choice is FHIR.string then
      Message(null as Interval<DateTime>, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a String value is not supported')
    else
      null as Interval<DateTime>
  end

define function ToInterval(period FHIR.Period):
    if period is null then
        null
    else
        if period."start" is null then
            Interval(period."start".value, period."end".value]
        else
            Interval[period."start".value, period."end".value]

define function ToDate(value date): value.value

define function ToQuantity(quantity FHIR.Quantity):
    case
        when quantity is null then null
        when quantity.value is null then null
        when quantity.comparator is not null then
            Message(null, true, 'FHIRHelpers.ToQuantity.ComparatorQuantityNotSupported', 'Error', 'FHIR Quantity value has a comparator and cannot be converted to a System.Quantity value.')
        when quantity.system is null or quantity.system.value = 'http://unitsofmeasure.org'
              or quantity.system.value = 'http://hl7.org/fhirpath/CodeSystem/calendar-units' then
            System.Quantity { value: quantity.value.value, unit: ToCalendarUnit(Coalesce(quantity.code.value, quantity.unit.value, '1')) }
        else
            Message(null, true, 'FHIRHelpers.ToQuantity.InvalidFHIRQuantity', 'Error', 'Invalid FHIR Quantity code: ' & quantity.unit.value & ' (' & quantity.system.value & '|' & quantity.code.value & ')')
    end

define function ToCalendarUnit(unit System.String):
    case unit
        when 'ms' then 'millisecond'
        when 's' then 'second'
        when 'min' then 'minute'
        when 'h' then 'hour'
        when 'd' then 'day'
        when 'wk' then 'week'
        when 'mo' then 'month'
        when 'a' then 'year'
        else unit
    end